Relative standard deviation vs standard deviation
The standard deviation tells you the spread in the data's own units. The relative standard deviation (RSD) divides that spread by the mean and gives a percentage, so you can compare precision across data sets of different size. Use SD to describe one data set, RSD to compare several.
The formulas
%RSD = (s ÷ x̄) × 100
s is the sample standard deviation and x̄ the mean. Nothing else changes, so you can get the RSD from any standard deviation you already have.
Why SD alone can mislead
Say instrument A reads about 10 units with an SD of 1, and instrument B reads about 1000 with an SD of 5. B has the larger SD, but that is only because its readings are larger.
| Instrument | Mean | SD | %RSD |
|---|---|---|---|
| A | 10 | 1 | 10.0% |
| B | 1000 | 5 | 0.5% |
Relative to its readings, B is 20 times more precise than A. The RSD shows that; the SD hides it.
When SD is the better choice
- You want the spread in real units, such as ± 2 cm.
- You are using the 68–95–99.7 rule, which is defined in SD units.
- The mean is near zero or negative, where a ratio breaks down.
The temperature trap
RSD only makes sense on a ratio scale, one where zero means none of the thing. Take three readings, 20, 22 and 24 °C. The mean is 22 and the SD is 2, so the RSD is 9.1%. Convert the same readings to kelvin and the SD is still 2, but the mean is 295.15, so the RSD drops to 0.68%. Same data, different answer, because Celsius has an arbitrary zero. Do not report RSD for temperatures in °C or °F.
Where RSD is used
Analytical chemistry checks method precision with replicate injections and an RSD limit, often 2% for assays; the good %RSD guide lists limits by field. Finance and quality control use the same ratio under the name coefficient of variation.
To calculate it, enter your replicates into the RSD calculator, which shows the mean, SD and %RSD together.
Related calculators
-
Relative standard deviation calculator
Mean, SD and %RSD from your data in one step.
-
Coefficient of variation calculator
The same ratio, as a decimal or percent.
-
What is a good %RSD?
Acceptance limits by field.
Common questions
What is the difference between standard deviation and relative standard deviation?
The standard deviation is in the units of the data. The relative standard deviation divides it by the mean and multiplies by 100, so it is a unitless percentage: %RSD = (s ÷ x̄) × 100.
Is relative standard deviation the same as coefficient of variation?
Yes, apart from the percent sign. The coefficient of variation is s ÷ x̄ as a ratio; the %RSD is that ratio times 100. Chemists say RSD, statisticians say CV.
When should I use RSD instead of SD?
When you are comparing the spread of data sets with different means or units, or checking precision against an acceptance limit such as 2%. Use the plain SD when the data share one scale and you want the spread in real units.
Can RSD be negative or over 100%?
It can exceed 100% when the SD is larger than the mean. It is negative or meaningless if the mean is negative or close to zero, so avoid it there.